Skip to content
Guides · How to play

Dawn of Defense Beginner Guide

Your first hour in one line: finish the tutorial, bridge to the first island, put a sawmill against the forest and a Boltskot on high ground, then upgrade the towers you have instead of spreading thin.

Checked:

Dawn of Defense build menu placing a Boltskot tower, with its range circle on the island and the tower card on the right
6side Studio screenshot, Steam store page · © 6side Studio

The first hour, step by step

  1. Play the tutorial. The launch build has a new tutorial; its bridge chapter is called Crossing the Trench. Do not skip it — bridges are the one control that is not obvious.
  2. Build a bridge. One end goes on the edge of your island, the other on the opposite bank. If it will not place, slide the far end along the shore until it snaps. Rotate the camera with the mouse wheel held down and drag. An early bridge costs 65 wood in NoobFeed’s run.
  3. Take the first island with Hogvald and your two Axemen. Your hero rides a boar and swings a warhammer; he can die, but he respawns after a delay and regenerates.
  4. Place a sawmill against forest. Each adjacent forest tile adds wood at the end of every wave. Buildings rotate with Q and E, and you see the yield preview before you place.
  5. Put your first Boltskot on high ground. Since the New Heights update, towers on higher tiles get more range. The first Boltskot is free.
  6. Pick a runestone. After each wave you choose one of three. Early on, take economy or the tower you actually built.
  7. Upgrade before you expand. Every tower has three levels and two upgrade paths; one strong tower beats three weak ones at this stage.
Dawn of Defense screenshot: grassy hex islands joined by bridges above the trench, with the glowing Spiridun spirit tower in the corner
6side Studio screenshot, Steam store page · © 6side Studio

Five rules that save early runs

  • Plots are shared. Each island has a building limit, and towers compete with sawmills, windmills and quarries for the same tiles. Decide what an island is for before you fill it.
  • Resources arrive between waves. Income lands at the end of a wave, so you cannot buy your way out of a bad wave mid-fight. Build before you call the next one.
  • Do not send everyone to the fortress. When you assault an Imperial fortress, its warlord heads straight for the Spiridun. Keep towers and a few units at home.
  • Use the clock. You can pause, speed up and call waves early. Pause to place buildings; call early only when the trench is clean.
  • Read enemy bars. Some imperial units carry armour, others a second health bar called Ward that must be broken first. Tower and unit upgrades that pierce armour or break Ward matter more than raw damage later on.
Dawn of Defense - New Heights Trailer · 6side Studio · YouTube, uploaded 2026-04-23. Loads from youtube-nocookie.com when you press play.

Which island first?

The game does not publish map layouts or a fixed island order, and maps vary between runs, so I will not give you a route. What the guides agree on is a priority: first an island with forest (wood is your bridge and building currency), then one with open flat tiles for a windmill and fields (food trains troops), and only then the islands with stone and iron deposits, which on some maps sit beyond the first fortress. More on that in the economy guide.

Dawn of Defense zoomed-out map: a ring of floating islands in the clouds, some settled and some still held by the empire
6side Studio screenshot, Steam store page · © 6side Studio

After your first run

Win or lose, you earn Runes to spend on the Rune Wheel, the permanent tree with tower, warrior and economy branches. New towers like Tarbarl and Eyodin, the Mead Hall and Pikemen are unlocked there or through runestones. The runestone guide explains both systems.

Questions people ask

How do you build bridges in Dawn of Defense?
Place one end on your island’s edge and the other on the opposite bank; if it does not fit, move the far end along the shore. The tutorial chapter “Crossing the Trench” covers it.
Where should I put towers?
On high ground near the trench: elevated towers get bonus range since the New Heights update.
Can you change the enemy path?
No. The trench route is fixed; you choose tower positions, not the path.
What should my first runestone be?
Economy, or an upgrade for the tower you already built. Spreading picks across towers you do not use wastes them.

Sources

  1. SeniorsLord: Complete Beginner Guide (YouTube) — checked 2026-11-20
  2. NoobFeed review of Dawn of Defense (18 Nov 2026, 77/100) — checked 2026-11-20
  3. 6side Studio: New Heights update, patch 0.17.1 (16 Apr 2026) — checked 2026-11-20
  4. Yuffi Plays: Dawn of Defense review after 40 hours (YouTube) — checked 2026-11-20
  5. 6side Studio: “Dawn of Defense is OUT NOW!” (17 Nov 2026) — checked 2026-11-20
  6. 6side Studio: Adding a New Layer of Depth – enemy design (16 Nov 2026) — checked 2026-11-20